Kurv
0
kr 0,00
Pickuper
Skriv inn undertittel her
Clearaudio
TOTAL MASS 8.6g (± 0.2g)
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (1KHZ, 5CM/S) ~ 3.3mV
CHANNEL SEPARATION (1KHZ) 20dB
CHANNEL BALANCE (1KHZ) 2dB
TRACKING ABILITY 80μm
RECOMMENDED TRACKING FORCE 2.2g ± 0.3g
COIL IMPEDANCE (1KHZ) 0.66kΩ
COIL INDUCTANCE 400mH
LOAD RESISTANCE 47kΩ
LOAD CAPACITANCE 100pF
CANTILEVER / STYLUS SHAPE Aluminium / elliptical
COMPLIANCE 15μ/mN
CARTRIDGE BODY Aluminium Pris 2,875.-
TOTAL MASS 8.4g (± 0.4g)
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (1KHZ, 5CM/S) ~ 3.3mV
CHANNEL SEPARATION (1KHZ) 20dB
CHANNEL BALANCE (1KHZ) 1.5dB
TRACKING ABILITY 80μm
RECOMMENDED TRACKING FORCE 2.2g ± 0.3g
COIL IMPEDANCE (1KHZ) 0.66kΩ
COIL INDUCTANCE 400mH
LOAD RESISTANCE 47kΩ
LOAD CAPACITANCE 100pF
CANTILEVER / STYLUS SHAPE Aluminium / elliptical
COMPLIANCE 15μ/mN
CARTRIDGE BODY Ebony wood Pris 4,485.-
TOTAL MASS 8.4g (± 0.4g)
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (1KHZ, 5CM/S) ~ 3.6mV
CHANNEL SEPARATION (1KHZ) 24dB
CHANNEL BALANCE (1KHZ) 0.8dB
TRACKING ABILITY 80μm
REC OMMEND TRACKING FORCE 2.2g ± 0.3g
COIL IMPEDANCE (1KHZ) 0.66kΩ
COIL INDUCTANCE 400mH
LOAD RESISTANCE 47kΩ
LOAD CAPACITANCE 100pF
CANTILEVER / STYLUS SHAPE Aluminium / elliptical
COMPLIANCE 15μ/mN
CARTRIDGE BODY Ebony wood Pris 7,475.-
TOTAL MASS 8.8g (±0.4g)
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (1KHZ, 5CM/S) ~ 3.6mV
CHANNEL SEPARATION (1KHZ) 26dB
CHANNEL BALANCE (1KHZ) 0.4dB
TRACKING ABILITY 90μm
RECOMMENDED TRACKING FORCE 2.2g ± 0.3g
COIL IMPEDANCE (1KHZ) 0.66kΩ
COIL INDUCTANCE 400mH
LOAD RESISTANCE 47kΩ
LOAD CAPACITANCE 100pF
CANTILEVER / STYLUS SHAPE Aluminium / elliptical
COMPLIANCE 15μ/mN
CARTRIDGE BODY Bullet proof wood Pris 9,200.-
TOTAL MASS 8.4g (± 0.4g)
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (1KHZ, 5CM/S) ~ 3.6mV
CHANNEL SEPARATION (1KHZ) 26dB
CHANNEL BALANCE (1KHZ) 0.4dB
TRACKING ABILITY 90μm
RECOMMENDED TRACKING FORCE 2.2g ± 0.3g
COIL IMPEDANCE (1KHZ) 0.66kΩ
COIL INDUCTANCE 400mH
LOAD RESISTANCE 47kΩ
LOAD CAPACITANCE 100pF
CANTILEVER / STYLUS SHAPE Aluminium / elliptical
COMPLIANCE 15μ/mN
CARTRIDGE BODY Ebony wood. Pris 11,385.-
TOTAL MASS 8.4g (± 0.4g)
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (1KHZ, 5CM/S) ~ 3.6mV
CHANNEL SEPARATION (1KHZ) 28dB
CHANNEL BALANCE (1KHZ) 0.3dB
TRACKING ABILITY 90μm
RECOMMEND TRACKING FORCE 2.2g ± 0.3g
COIL IMPEDANCE (1KHZ) 0.66kΩ
COIL INDUCTANCE 400mH
LOAD RESISTANCE 47kΩ
LOAD CAPACITANCE 100pF
CANTILEVER / STYLUS SHAPE Boron / HD Diamond
COMPLIANCE 16μ/mN
CARTRIDGE BODY Ebony wood. Pris 13,800.-
TOTAL MASS 9.0g (± 1g)
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (1KHZ, 5CM/S) ∼ 3.6mV
CHANNEL SEPARATION (1KHZ) 30dB
CHANNEL BALANCE (1KHZ) 0.2dB
TRACKING ABILITY 90μm
RECOMMEND TRACKING FORCE 2.4g ± 0.3g
COIL IMPEDANCE (1KHZ) 0.66kΩ
COIL INDUCTANCE 400mH
LOAD RESISTANCE 47kΩ
LOAD CAPACITANCE 100pF
CANTILEVER / STYLUS SHAPE Boron / Gyger S double polished
COMPLIANCE 17μ/mN
CARTRIDGE BODY Ebony wood with German Silver inlay. Pris 21,850.- På lager for demo
TOTAL MASS 8.0g
FREQUENCY RESPONSE 20Hz - 40kHz
OUTPUT VOLTAGE (AT 5 CM/SEC) 0.4mV
CHANNEL SEPARATION > 28dB
CHANNEL BALANCE < 0.5dB
TRACKING ABILITY 80μm
RECOMMENDED TRACKING FORCE 2.0g (± 0.2g)
CARTRIDGE IMPEDANCE 11Ω
CANTILEVER / STYLUS SHAPE Boron / Micro Line
COMPLIANCE 9μ/mN
COIL ASSEMBLY -
COIL MATERIAL OFC - copper
CARTRIDGE BODY Aluminium-magnesium alloy with. Pris 10,925.-
TOTAL MASS 8.0g
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (AT 5CM/SEC) 0.4mV
CHANNEL SEPARATION > 30dB
CHANNEL BALANCE < 0.3dB
TRACKING ABILITY 80μm
RECOMMENDED TRACKING FORCE 2.2g (± 0.2g)
CARTRIDGE IMPEDANCE 11Ω
CANTILEVER / STYLUS SHAPE Boron / Micro Line
COMPLIANCE 9μ/mN
COIL ASSEMBLY -
COIL MATERIAL OFC - copper
CARTRIDGE BODY Aluminium-magnesium alloy with ceramic surface layer. Pris 16,100.-
TOTAL MASS 10.6 - 11.2g
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (AT 5 CM/SEC) 0.5mV
CHANNEL SEPARATION 25 - 30dB
CHANNEL BALANCE < 0.5dB
TRACKING ABILITY 80μm
RECOMMENDED TRACKING FORCE 2.8g (± 0.2g)
CARTRIDGE IMPEDANCE 50Ω
CANTILEVER / STYLUS SHAPE Boron / Clearaudio Prime Line
COMPLIANCE 15μ/mN
COIL ASSEMBLY Absolutely symmetrical design
COIL MATERIAL 24 carat gold
CARTRIDGE BODY Hand polished ebony wood body. Pris 21,850.-
TOTAL MASS 7.0g
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (AT 5CM/SEC) 0.5mV
CHANNEL SEPARATION 25 - 30dB
CHANNEL BALANCE < 0.5dB
TRACKING ABILITY: 80μm
RECOMMENDED TRACKING FORCE 2.8g (± 0.2g)
CARTRIDGE IMPEDANCE 50Ω
CANTILEVER / STYLUS SHAPE Boron / Clearaudio Prime Line
COMPLIANCE 15μ/mN
COIL ASSEMBLY Absolutely symmetrical design
COIL MATERIAL 24 carat gold
CARTRIDGE BODY Satiné wood Pris 33,350.-
TOTAL MASS 7.0g
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (AT 5 CM/SEC) 0.5mV
CHANNEL SEPARATION 25 - 30dB
CHANNEL BALANCE < 0.5dB
TRACKING ABILITY 80μm
RECOMMENDED TRACKING FORCE 2.8g (± 0.2g)
CARTRIDGE IMPEDANCE 50Ω
CANTILEVER / STYLUS SHAPE Boron / Clearaudio Prime Line
COMPLIANCE 15μ/mN
COIL ASSEMBLY Absolutely symmetrical design
COIL MATERIAL 24 carat gold
CARTRIDGE BODY Ebony wood Pris 46,000.-
TOTAL MASS 7.5g
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (AT 5 CM/SEC) 0.5mV
CHANNEL SEPARATION > 32dB
CHANNEL BALANCE < 0.5dB
TRACKING ABILITY 80µm
RECOMMENDED TRACKING FORCE 2.8g (± 0.2g)
CARTRIDGE IMPEDANCE 50Ω
CANTILEVER / STYLUS SHAPE: Boron / Clearaudio Prime Line
COMPLIANCE 15µ/mN
COIL ASSEMBLY Absolutely symmetrical design
COIL MATERIAL 24 carat gold
CARTRIDGE BODY Bullet proof wood Pris 56,350.-
TOTAL MASS 6.8g
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (AT 5CM/SEC) 0.5mV
CHANNEL SEPARATION 25 - 30dB
CHANNEL BALANCE < 0.5dB
TRACKING ABILITY 80μm
RECOMMENDED TRACKING FORCE 2.8g (± 0.2g)
CARTRIDGE IMPEDANCE 50Ω
CANTILEVER / STYLUS SHAPE Boron / Clearaudio Prime Line
COMPLIANCE 15μ/mN
COIL ASSEMBLY Absolutely symmetrical design
COIL MATERIAL 24 carat gold
CARTRIDGE BODY Aluminium with 30 micron ceramic coating. Pris 67,850.-
TOTAL MASS 10.0g
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (AT 5 CM/SEC) 0.5mV
CHANNEL SEPARATION > 30dB
CHANNEL BALANCE < 0.3dB
TRACKING ABILITY 90μm
RECOMMENDED TRACKING FORCE 2.8g (± 0.2g)
CARTRIDGE IMPEDANCE: 50Ω
CANTILEVER / STYLUS SHAPE Boron / Clearaudio Prime Line
COMPLIANCE 15μ/mN
COIL ASSEMBLY Absolutely symmetrical design
COIL MATERIAL 24 carat gold
CARTRIDGE BODY Titanium Pris 100,050.-
TOTAL MASS ~ 15.0g (± 2g)
FREQUENCY RESPONSE 20Hz - 20kHz
OUTPUT VOLTAGE (AT 5 CM/SEC) 0.5 - 0.6mV
CHANNEL SEPARATION > 32dB
CHANNEL BALANCE < 0.2dB
TRACKING ABILITY 90μm
RECOMMENDED TRACKING FORCE 2.8g (± 0.2g)
CARTRIDGE IMPEDANCE 50Ω
CANTILEVER / STYLUS SHAPE Boron / Clearaudio Prime Line
COMPLIANCE 15μ/mN
COIL ASSEMBLY Absolutely symmetrical design
COIL MATERIAL 24 carat gold
CARTRIDGE BODY 14 carat gold. Pris 172,500.-
NAGAOKA
Nagaoka MP-500 er toppmodellen i MP-serien. Her er alle elementer optimalisert for å hente det beste ut fra Nagaokas unike konstruksjon. Materialvalget i kroppen reduserer uønskede vibrasjoner og forvrenging, noe som resulterer i svært høy oppløsning og optimal støyskjerming. Magneter av samarium kobolt (SmCo) er blant de sterkeste magnetene tilgjengelig, og gir lav vekt kombinert med høy effektivitet.
Dette gir MP-500 en output på 3mV, som sammen med en lett og svært stiv nål av boron gir moving coil-ytelser i en moving magnet-konstruksjon. Selve stiften er en superfine line contact diamond, og er optimalisert for perfekt sporing og minimal forvrenging. Stiften er selvfølgelig utskiftbar, i likhet med alle modellene i MP-serien.
En uhyre musikalsk og transparent pick-up som få konkurrenter kan matche.
Stereophile´s Editors´Top Picks For The Industry´s Best Products
Spesifikasjoner:
- Type: Moving magnet
- Cantilever: High-strength boron
- Stylus type: Superfine line contact diamond
- Output voltage @ 1kHz,5cm/sec: 3mV
- Frequency response: 20Hz-25kHz
- Channel balance @ 1kHz: > 1dB
- Channel separation @ 1kHz: > 27dB
- Recommended loading: 47k ohms
- Dynamic compliance: 8.5 x 10-6 cm/dyne
- Tracking force range: 1.3 - 1.8 g
- Weight: 8 g
- Break-in period: 30 hours
- Stylus replacement: Nagaoka JN-P500
Pris MP-500: 10,995.-
MP-500H: 11,995.-
JN-P500: 5,595.-
Nagaoka MP-300 er Nagaokas noe rimeligere versjon av den glimrende MP-500.
Det betyr ikke lavere ytelse, men en annen innfallsvinkel for å oppnå perfekt matching og optimalt resultat. Den indre oppbyggingen er identisk med MP-500, men en stift med superfine polished elliptical bonded diamond er optimalisert for å fange de øvre frekvensene og dermed gi en detaljert, transparent og rask topp og øvre mellomtone. Stifthuset er i likhet med toppmodellen skrudd til kroppen. Lavt støynivå, fantastisk sporingsevne og en brilliant diskant gir i kombinasjon med MP-seriens unike konstruksjon en musikalsk og detaljert pick-up med en utrolig oppløsning.
Spesifikasjoner:
- Type: Moving magnet
- Cantilever: High-strength boron
- Stylus type: Superfine polished elliptical bonded diamond
- Weight: 8 g
- Output voltage @ 1kHz,5cm/sec: 5mV
- Frequency response: 20Hz-25kHz
- Channel balance @ 1kHz: > 1dB
- Channel separation @ 1kHz: > 25dB
- Recommended loading: 47k ohms
- Dynamic compliance: 7.2 x 10-6 cm/dyne
- Static compliance: 20 x 10-6 cm/dyne
- Tracking force range: 1.3 - 1.8 g
- Break-in period: 30 hours
- Stylus replacement: Nagaoka JN-P300
Pris MP-300: 8,995.-
MP-300H: 9,995.-
JN-P300: 4695.-
Nagaoka MP-200 er en pickup med store kontraster. På den ene siden gir den en raffinert og organisk presentasjon med vekt på en engasjerende mellomtone og silkemyk topp. På den andre siden leverer den detaljer, dynamikk og nærvær andre pickup´er ofte kamuflerer som "varme". Den burde derfor ikke komme som en overraskelse at MP-200 er konstruert på samme måte som toppmodellen MP-500 med samarium kobolt magneter (SmCo) og nål i boron, men i et solid hus i PPS-plast, stifthus i karbonforsterket plast og med en superfine elliptical diamond for å kombinere god sporingsevne og rask respons. En fantastisk involverende pickup som kombinerer det beste av det beste med en pris som gjør high end tilgjengelig for de fleste. For mange vil dette være den "siste pickup`en".
SPESIFIKASJONER:
- Type: Moving magnet
- Cantilever: High-strength Boron
- Stylus type: Superfine elliptical diamond
- Weight: 6.5 g
- Output voltage @ 1kHz,5cm/sec: 4mV
- Frequency response: 20Hz-23kHz
- Channel balance @ 1kHz: > 1.5dB
- Channel separation @ 1kHz: > 25dB
- Recommended loading: 47k ohms
- Dynamic compliance: 7.2 x 10-6 cm/dyne
- Static compliance: 20 x 10-6 cm/dyne
- Tracking force range: 1.5 - 2.0 g
- Break-in period: 30 hours
- Stylus replacement: Nagaoka JN-P200
Pris: MP-200: 5,995.-
MP-200H: 6,495.-
JN-P200: 3,395.-
Nagaoka MP-150 leverer presis bass, åpenhet i hele frekvensområdet og en rask, men myk topp.
For en erfaren lytter som ønsker et stramt, fyldig og presist lydbilde vil MP-150 gi en langvarig lytteglede. MP-150 benytter en nål i aluminiumslegeringen UT-58 og en superfine polished elliptical bonded diamond. Dette gjør MP-150 til pickup med god sporing, kvikk respons og stor musikalitet.
Spesifikasjoner:
- Type: Moving magnet
- Cantilever: Hardened, low-mass tapered
- Stylus type: Superfine elliptical diamond
- Weight: 6.5 g
- Output voltage @ 1kHz,5cm/sec: 4.5mV
- Frequency response: 20Hz-20kHz
- Channel balance @ 1kHz: > 1.5dB
- Channel separation @ 1kHz: > 24dB
- Recommended loading: 47k ohms
- Dynamic compliance: 6.0 x 10-6 cm/dyne
- Static compliance: 18 x 10-6 cm/dyne
- Tracking force range: 1.5 - 2.0 g
- Break-in period: 30 hours
- Stylus replacement: Nagaoka JN-P150.
Pris: MP-150: 4,995.-
MP-150H: 5,495.-
JN-P150: 2,395.-
Nagaoka MP-110 gir detaljer, finesse og ikke minst balanse og respons som ingen pickup i prisklassen kan matche. Gode tester fra en samlet fagpresse bekrefter at MP-110 er den perfekte budsjett-pickup, og en pickup man beholder lenge.
"For the money, this cheap and supremely cheerful cartridge represents good value, and those
on a budget should hunt it down." What HiFi
Spesifikasjoner
- Type: Moving magnet
- Cantilever: Aluminum alloy
- Stylus type: Superfine polished elliptical bonded diamond with 0.4 x 0.7 mil radius
- Weight: 6.5 g
- Output voltage @ 1kHz,5cm/sec: 5mV
- Frequency response: 20Hz-20kHz
- Channel balance @ 1kHz: > 1.5dB
- Channel separation @ 1kHz: > 23dB
- Recommended loading: 47k ohms
- Dynamic compliance: 6.0 x 10-6 cm/dyne
- Static compliance: 18 x 10-6 cm/dyne
- Tracking force range: 1.5 - 2.0 g
- Break-in period: 30 hours
- Stylus replacement: Nagaoka JN-P110
Pris: MP-110: 2,295.-
MP-110H: 2,795.-
JN-P110: 995.-
Nagaoka MP-100 er et meget godt kjøp i en prisklasse der balanse, musikalitet og involverende gjengivelse går foran ekstrem oppløsning og den dypeste bassen. En perfekt starter-pickup med musikalske egenskaper lang utover sin beskjedne pris.
"From Louis Armstrong to Mozart or the Rolling Stones the Nagaoka MP-100 does an admirable job of proving it is quite capable of handling just about anything you want to spin its way, which in my opinion just adds to its value and appeal. This is a fantastic cartridge, and what it does, it does well without breaking the bank."
Needledoctor.
Spesifikasjoner
- Type: Moving magnet
- Cantilever: Lightweight aluminum alloy
- Stylus type: Conical diamond with .0006 inch radius
- Weight: 6.5 g
- Output voltage @ 1kHz,5cm/sec: 5mV
- Frequency response: 20Hz-20kHz
- Channel balance @ 1kHz: > 2dB
- Channel separation @ 1kHz: > 22dB
- Recommended loading: 47k ohms
- Dynamic compliance: 5.5 x 10-6 cm/dyne
- Static compliance: 18 x 10-6 cm/dyne
- Tracking force range: 1.5 - 2.3 g
- Break-in period: 30 hours
- Stylus replacement: Nagaoka JN-P100
Pris: MP-100: 1,795.-
MP-100H: 2,295.-
JN-P100: 795.-